Troubleshooting For Oven Ignition Systems By Appliance Repair Experts In Markham

Most of the kitchen appliances are subject to frequent failure for two primary reasons. One is that these appliances are extensively used often a couple of times in a day and the other reason is that these appliances face a lot of heat, oil and food spills and clogs. Therefore, from your dishwasher to the range hood, from the cooking range to the oven all must be handled, maintained and inspected carefully to know the time for Appliance Repair in Markham. If your oven does not ignite there are a few specific ways to go about it to ensure effective and proper repair.

Check The Cycle Timer

You must start as always by checking the automatic bake cycle and timer controls. If these are in perfect working condition, focus now on the things that is not working at all or properly. Check whether the electrode is sparking when the thermostat of the oven is on and the pilot flame is not there. Look whether there is a spark but no primary pilot or the primary pilot is igniting whereas the secondary is not. Apart from that check whether there is any sparking even after the thermostat is shut off. These are the basic checks to do before you start with the actual Appliance Repair in Markham.

If There Is A Spark

If sparking occurs in your oven and the main burner is not lighting while the pilot light may or may light, check the thermostat or the pilot orifice. Remember, the thermostat actually supplies the pilot with the required gas in these ovens. Therefore, it has to be on so that the required supply of gas is there to light the primary as well as the secondary pilot flame. If it is not on then clean the pilot assembly and sensor bulb. If this does not work you may adjust the secondary flame a bit higher. If it still done not work, call a professional for Appliance Repair in Markham to replace the pilot assembly.

If There Is No Spark

If sparking does not occur in your oven, then as a strategy to follow for Appliance Repair in Markham,you must run a few checks to identify the issue with the high-voltage sparking system. However, if you have a half cooked meal when it happens and are in a hurry you can use your oven by turning the oven thermostat off and carefully igniting the primary pilot with a match. However, you must remember that the moment you turn off the thermostat the pilot light will go out. Such issues arise when there is a problem with the rotary switch on the valve that suddenly stops working.Test continuity as instructed.

Sparking Does Not Stop

When sparking does not stop there moisture in the ignition switches causing the shorts. Pull the lead off to test the switch to see whether or not the sparking stops. If it stops then the switch is bad and needs replacing. In certain ovens, when the spark module fails, similar condition may arise and it must be replaced. To read more Click Here